知道這些TCM維修代碼，助你故障快速修復_叉車百科_資訊動態_廈門永新昌機械設備有限公司
資訊動態
比亞迪叉車
2021-06-07
在電動叉車維修中，維修師傅經常會通過代碼判斷定位叉車的故障，快速的幫客戶處理好叉車問題。小編整理以下TCM電動叉車代碼提供大家使用：
A1:CONTACTOR-MAIN
B10: FUSE-MAIN
B11: IGBT-TRAVEL
B12: SENSOR-CURRENT TRAVEL >電流傳感器U相V相
B13: DIRECTIONAL
B14: ACCELERATOR
C21: IGBT-HYD
C22: SENSOR-CURRENT HYD >電流傳感器U相V相
C23: SWITCH-LIFT
C24: POTENTIO-MAST >傾斜水平或提升電位計出錯
D30: FUSE-EPS>加速輸入減至1/2
D31: SENSOR-EPS TOROUE >EPS扭矩傳感器加速輸入減至1/2
D32: TR-EPS MAIN >加速輸入減至1/2
E40: TR-AOS >電流閥出錯
E41: POTENTIO-HYD LEVER >AOS控制電位計出錯
E42: ENODER-HYD MAST >提升高度編碼器
F51: *FAIL CURRENT-TRAVER* >行駛馬達電流
F52: *FAIL CURRENT-HYD* >HYD MONTOR CURRENT
F53: *FAIL VOLTAGE-TRAVEL*
F54: *FAIL VOLTAGE-HYD*
F55: *REDUC DUTY-OPERATION* >PCB OR IGBT TEMP
XXX: *FAIL BUS SYSTEM* >DIPLAY TRANS
WOO: *FAIL OPERATION* >行駛/液壓跳閘
W01: *TURN OFF DY SWITCH* >行駛/液壓嚴重錯誤
W02: *RELEASE PARKING BRAKE* >
W03: *REPLENISH REFINED WATER FOR BATTERY* >電瓶補水
W04: *REFILL BRAKE OIL*
W05: *REDUCE THE LOAD*
W06: *REFILL HYDRAULIC OIL*
W07: *CHARGE THE BATTERY*
W08: *RELEASE ACCEL TO NEUTRAL*
W09: *OFF HYD LEVER TO NEUTRAL*
W10: *AOS(自動貨叉放平) FAIL OPERATION* >電磁線圈沒有電流通過
W11: *RACK MISSET* >提升高度設定錯誤
W12: *APPLY PARKING BRAKE* >操作者在未拉手剎時試圖離開座位
@@FBR@@
A1: CONTACTOR
A2: SENSOR- CURRENT BATTERY
B10: FUSE-TRAVEL
B11: IGBT-U-TRAVEL
B12: IGBT-V-TRAVEL
B13: IGBT-W-TRAVEL
1/3
B14: SESOR-CURRENT-TRAVEL >U&V相
B15: ACCELERATOR
C20: FUSE-HYD
C21: IGBT-U-HYD
C22: IGBT-V-HYD
C23: IBT-W-HYD
C24: SENSOR-CURRENT-HYD >U&V相
C25: SWITCH-LIFT
C26: POTENTIO-MAST
D30: FUSE-EPS >速度減半
D31: SENSOR-EPS TORQUE >速度減半
D32: TR-EPS MAIN >速度減半
E40: TR-AOS
E41: POTENTIO-HYD.LEVEL
E42: ENCODER-HYD MAST
F50: FUSE-FRONT BRAKE
F51: POTENTIO-STEERING ANGEL >角度傳感器
*FAIL CURRENT*
*FAIL CURRENT-TRAVEL*
*FAIL CURRENT-HYD*
*FAIL VOLTAGE-TRAVEL*
*FAIL VOLTAGE-HYD*
*REDUCE DUTY-TRAVEL
*REDUCE DUTY-HYD*
*FAIL BUS SYSTEM*
*FAIL MAIN BOARD* >IGBT門電路制動和外部5V電源電壓
*FAIL FAIN*
*FAIL OPERATION*
*TURN OFF KEY SWITCH*
*REDUCE THE LOAD*
*REFILL HYDRAULIC OIL*
*REFILL BRAKE OIL*
*REPLENISH REFINED WATER FOR BATTERY*
*CHARGER THE BATTERY*
*RELEASE PARKING BRAKE*
*RELEASE ACCEL TO NEUTRAL*
*OFF HYD LEVER TO NEUTRAL*
*AOS FAIL OPERATION* >當AOS緊急停止開關被按下時
*RACK MISSET* >提升設備中配置了錯誤的程序
*APPLY PARKING BRAKE* >停車后沒有使用停車制動
@@顯示板開關RS1位置@@
**0: MONITORING OK 正常監控，計時，預約充電，時期時間，低速設置，行駛模式，儀表，顯示，再生，
**1: 監控符號
2/3
**2: 車型設置 **3: 反向制動,剎車設置 PLUGGING BRAKE **4: 低速行駛時提升速度1/2/3,提升速度1/2,傾斜速度，屬具1/2/3 **5: 顯示語言 **6: 選件設置 **7: 電壓，電流，溫度 **8: RAM和I/O數字 **9: 故障歷史1/2 **A: 電瓶電壓 **B: 轉向速度限制 **C: AOS設置1 **D: AOS設置2 **E: 記憶初始化 **F: 沒有故障顯示ROS屏幕狀態。
附近叉車出租、租賃，維修，輪胎，鋰電池，配件；電動叉車、柴油叉車，叉車買賣，就到永新昌叉車服務平臺。
資訊動態頁面網址：http://www.dgoldding.com/news/baike/202106077056.html
